鋼化玻璃門應如何選購

How to Choose Tempered Glass Doors

1、鋼化玻璃和普通玻璃是不一樣的，鋼化玻璃的表面將會存在藍光的彩色條紋，如果不仔細是無法確認的。因此，在選購鋼化玻璃門的時候，可以將其放置于陽光下，然后從側面去觀察，要是看到彩色條紋，則是鋼化玻璃，否則就是普通玻璃。

1. Tempered glass is different from ordinary glass, and there will be colored stripes of blue light on the surface of tempered glass, which cannot be confirmed without careful consideration. Therefore, when choosing tempered glass doors, you can place them in sunlight and observe them from the side. If you see colored stripes, it is tempered glass, otherwise it is ordinary glass.

2、用手觸摸鋼化玻璃的表面，憑借某種感覺，也可以知道鋼化玻璃的真假。主要是根據鋼化玻璃表面是否凹凸、較長邊是否有微小的弧度、表面是否有裂痕，判斷是否為鋼化玻璃。只要是表面凹凸且有微小弧度，說明是鋼化玻璃。

2. By touching the surface of tempered glass with your hand and relying on a certain feeling, you can also know the authenticity of tempered glass. It is mainly based on whether the surface of tempered glass is concave and convex, whether there are small arcs on the longer edges, and whether there are cracks on the surface to determine whether it is tempered glass. As long as the surface is convex and slightly curved, it indicates tempered glass.

3、一般來說，鋼化玻璃經過處理之后，都會在其表面上形成一個保護層，這個保護層可以很好的保護鋼化玻璃，讓其具備有堅硬、光滑、不容易碎的特點。要是發現所選擇的鋼化玻璃表面粗糙，則說明質量是存在問題的。

3. Generally speaking, after treatment, tempered glass forms a protective layer on its surface, which can effectively protect tempered glass, making it hard, smooth, and not easily broken. If the surface of the selected tempered glass is found to be rough, it indicates that there is a quality issue.

濟南玻璃門維修安裝注意事項

Precautions for maintenance and installation of Jinan glass doors

1、裝置玻璃門前，要查看門窗扇是否平整，預留孔眼是否完全、精確，如果不契合要求的就應該先校正。

1. Before installing the glass door, it is necessary to check whether the door and window leaves are flat, and whether the reserved holes are complete and accurate. If they do not meet the requirements, they should be corrected first.

2、裝置鋼框、門扇玻璃應用鋼絲卡固定，距離不得大于300mm，且每邊不少于兩個，也能夠以在鋼絲卡上抹油灰面層，以添加密封性。

2. The steel frame and door leaf glass of the device should be fixed with steel wire clamps at a distance of no more than 300mm, and there should be no less than two on each side. It is also possible to apply a putty surface layer on the steel wire clamps to add sealing.

3、如用油灰固定，則油灰應填實抹光。如用橡皮墊，應先將橡皮墊嵌入，并用壓條和螺釘固定。

3. If fixed with putty, the putty should be filled and polished. If using a rubber pad, it should be embedded first and fixed with pressure strips and screws.

4、如選用壓條固定，通常在四邊或兩頭加壓條，用密封膠封好。

4. If using pressure strips for fixation, usually add pressure strips on the four sides or two ends and seal them with sealant.

5、裝置各種輔助材料要契合規劃要求和有關規范規定。

5. The various auxiliary materials of the device should comply with the planning requirements and relevant regulations.

6、組裝彩色玻璃、磨花玻璃時，應與規劃圖畫契合，不得錯位、斜曲和松動，玻璃的朝向應契合規劃要求。

6. When assembling colored glass and ground glass, they should be in line with the planning drawings and should not be misaligned, skewed, or loose. The orientation of the glass should meet the planning requirements.

7、裝完要做好清潔作業。

7. After installation, do a good job of cleaning.

鋼化玻璃門應如何選購和安裝相關事項就講解到這里了，希望能夠給您好的幫助，更多事項就來我們網站http://www.mlzqjgx.cn咨詢！

That's all for the selection and installation of tempered glass doors. We hope to provide you with good help. For more information, please visit our website http://www.mlzqjgx.cn consulting service