The sensing width scale of Jinan automatic door sensor should be greater than the width of door opening. When people go to Jinan active door at normal speed, the automatic door shall be opened actively without any strange sound, and the action of opening the door shall be smooth without bumping. When people leave the active door, the automatic door will be closed automatically after delaying for 1 to 10 seconds. The delay time can be set by the active door switch parameters.

濟南感應門獨特的控制體系特性具有智能化主動、隨機確診毛病，主動檢測操作次序，較佳化傳動特性，如主傳動的加/減速，傳動進程的沖突確診，噪聲等。主動門第.一次初調運轉時，體系主動進行學習，門翼分量和運動沖突力的丈量成果，主動調 理到可答應的較.大轉速，較.大靜態力的安 全調 理，傳感器可靠性測驗，主動測定通道開口端的位置。

The unique control system characteristics of Jinan induction door are intelligent, active and random fault diagnosis, active detection of operation sequence, better transmission characteristics, such as acceleration / deceleration of main transmission, conflict diagnosis of transmission process, noise, etc. During the first initial adjustment and operation of the active door, the system takes the initiative to learn, the measurement results of the door wing component and motion conflict force, actively adjust to the allowable safety adjustment of larger rotating speed and larger static force, test the reliability of the sensor, and actively measure the position of the opening end of the channel.

濟南感應門感應器探測到有人進入時，將脈沖信號傳給主控器，主控器判別后告訴馬達運轉，同時監控馬達轉數，以便告訴馬達在必定時分加力和進入慢行運轉。

When Jinan induction door sensor detects someone entering, it transmits the pulse signal to the main controller. After discrimination, the main controller tells the motor to run, and monitors the motor speed, so as to tell the motor to apply force at a certain time and enter slow running.

馬達得到必定運轉電流后做正向運轉，將動力傳給同步帶，再由同步帶將動力傳給吊具體系使門扇敞開，門扇敞開后由控制器作出判別，如需關門，告訴馬達作出反向運動，封閉門扇。

After the motor obtains a certain operating current, it runs in the forward direction, transmits the power to the synchronous belt, and then the synchronous belt transmits the power to the spreader system to open the door leaf. After the door leaf is opened, the controller makes a judgment. If it is necessary to close the door, tell the motor to make a reverse movement and close the door leaf.